Conveners
Survey and Alignment II
- Davide Bianculli (ANL)
-
David Krawczuk (Fermilab)08/10/2024, 14:40
Fermilab’s PIP-II project will result in a new beamline approximately 510 meters long. A geodetic control network will need to be established to precisely align the beamline components in the tunnel. This design focused on the tunnel network, as the surface network had already been considered. After selecting the geometry, instrumentation, and methodology, a pre-analysis was performed to...
Go to contribution page -
Cristina Gonzalez-Torres (ESRF)08/10/2024, 15:05
The European Synchrotron Radiation Facility (ESRF) was established in 1988 as the world’s first 3rd generation light source. Alignment was critically important. The quadrupole and sextupole magnet alignment tolerances were 100 µm in both the horizontal and vertical directions perpendicular to the beam.
Go to contribution page
The vertical tolerance was achievable with high precision levelling, but in the late 1980’s... -
Brian Fuss (SLAC)08/10/2024, 15:30
The Metrology Department at SLAC develops and hosts numerous GIS (Geographic Information System) websites for most departments at the laboratory. In addition, the department creates large format maps for SLAC users and departments that are displayed throughout the lab. This presentation will outline some of the GIS work that SLAC Metrology provides, such as for environmental protection soil...
Go to contribution page