Workshop on Novel X-ray Science Opportunities at SLAC: High-Energy X-rays at XFEL

→ America/Los_Angeles
48/1-112A/B/C/D - Redwood A/B/C/D (SLAC)

48/1-112A/B/C/D - Redwood A/B/C/D

SLAC

2575 Sand Hill Rd, Menlo Park, CA 94025
90
Claudio Emma (SLAC), David Reis (SLAC), Uta Ruett (SLAC)
Description

The next-generation x-ray source LCLS-II-HE will deliver unprecedented capabilities as an 8 GeV superconducting XFEL, covering photon energies from 250 eV to 13 keV at repetition rates up to 1 MHz. In parallel, an integration of the existing copper-based XFEL with the FACET test facility could become a 2 km accelerator producing 30 GeV electron beams at up to 360 Hz. This development would extend XFEL photon energies to the 1–50 keV range, pushing well beyond current state-of-the-art limits.

This workshop will explore the transformative scientific opportunities enabled by these advances. By combining high photon energies—offering deep penetration and access to large regions of reciprocal space—with full beam coherence, extreme brightness, and ultrafast (1-100 fs) single-shot capabilities, entirely new experimental regimes become accessible. These include probing dynamics in industrially relevant materials, resolving buried functional interfaces, and observing processes within realistic devices. Such capabilities open new pathways for studying disordered and complex systems whose structure and evolution remain largely inaccessible with conventional hard x-ray techniques.

Participants
  • Friday 28 August
    • 10:30 → 11:00
      Plenary: Welcome and Workshop Introduction
      Conveners: Claudio Emma (SLAC), David Reis (SLAC)
    • 11:00 → 12:30
      Plenary: Matter in Extremes
      Convener: Dr Mianzhen Mo (SLAC)
      • 11:00
        Prof. Leora Dresselhaus-Marais 30m

        HEXFEL Opportunities for Manufacturing Science

      • 11:30
        Dr. Jonathan Almer 30m

        Opportunities to Study Materials in Extremes with High-Energy X-rays

      • 12:00
        Prof. Sam Vinko (remote) 30m

        Two-colour pump-probe experiments in high energy density physics

    • 12:30 → 14:00
      Lunch
    • 14:00 → 15:00
      Plenary: Prospective Source Parameters and Materials Science and Engineering
      Convener: Prof. David Reis (SLAC)
      • 14:00
        Prof. Agostino Marinelli 30m

        Prospective source parameters for a high energy XFEL based on the SLAC linac

      • 14:30
        Dr. Zahir Islam 30m

        Quantum materials and devices: way forward from lessons learned in recent studies

    • 15:00 → 15:30
      Coffee Break: Group Photo
    • 15:30 → 17:00
      Plenary: Materials Science and Engineering
      Convener: Prof. Jerome Hastings (Stanford)
      • 15:30
        Dr. Jon Eggert 30m

        Advantages of High Energy X-Rays for HED Materials Research

      • 16:00
        Dr. Fan Zhang 30m

        NIST Perspectives on High-Speed High-Energy X-ray Diffraction for Advanced Manufacturing

      • 16:30
        Dr. Makina Yabashi 30m

        XFEL applications with >50 keV photons, particularly for the imaging/CT field

    • 17:00 → 18:30
      Plenary: Panel Discussion
    • 18:30 → 20:30
      Poster session and Reception
  • Saturday 29 August
    • 09:00 → 10:30
      Plenary: Materials Science and Engineering
      Convener: Dr Nicholas Strange (SLAC)
      • 10:00
        Dr. Stephan Hruszkewycz (remote) 30m

        Using coherent hard x-rays to enable imaging of nanoscale structural heterogeneity and dynamics in polycrystals

    • 10:30 → 11:00
      Coffee Break
    • 11:00 → 12:00
      Plenary: Chemistry
      Convener: Dr Adi Natan (SLAC)
      • 11:00
        Prof. Johan Gustafson 30m

        High energy XFEL for surface structure and catalysis

      • 11:30
        Dr. Simon Gerber 30m

        Escaping Beam Heating and Electronic Damage Using Ultrafast X-Ray Pulses

    • 12:00 → 13:30
      Lunch
    • 13:30 → 15:00
      Plenary: Materials Science and Engineering and High Energy X-ray Detectors
      Convener: Dr Uta Ruett (SLAC)
    • 15:00 → 15:30
      Coffee Break
    • 15:30 → 17:00
      Plenary: Panel Discussion. From science to functional facility requirements.
    • 17:00 → 17:30
      Plenary: Closing remarks